Active Pfc Battery Charger with Charge Current 12VDC 10A/25A/40A for Marine and Boat (High Efficiency Battery Charger)
AGM,battery BS1210 converter charger automatice voltage compensation charging
TBB TRIDENT series Smart battery charger on board charging for mobile marine application
Combined with up to date technology and our knowledge with batteries, Trident smart battery charger is specified designed for mobile application. It is an ideal solution for your battery charging on board.
Use BS battery charger only in well ventilated rooms. Do not expose the charger to rain, snow,
spray, or bilge water. To reduce risk of fire hazard, do not cover or obstruct the ventilation
openings. Do not install the charger in a zero‐ clearance compartment.
The battery temperature and voltage sensor supplied with BS charger measures the
temperature of battery
and automatically makes adjustments at real time to properly charge your batteries at
compensation rate of – 4mv / / cell.
Features :
- Active PFC featuring smaller and higher efficiency, max 92%.
- With multiple isolated outputs, including slave charger for starter battery.
- Automatically work as power supply or charger.
- Automatic temperature compensation charging.
- Automatic voltage compensation charging.
- Programmable with monitor.
- Night mode through remote control.
Specs
| Model | BS1210 | BS1225 | BS1240 | BS1225-3 | BS1240-3 |
| Electrical |
| Output voltage (PS mode) (Vdc) | 12.8V±0.256Vdc |
| Max Output current (A) | 10 | 25 | 40 | 25 | 40 |
| Nominal input voltage (Vac) | 85-265VAC,50/60Hz | 165-265VAC,50/60Hz |
| Charge algorithms | 5 steps. soft start, bulk, absorption, float, recycle |
| Temperature compensation | Automatically |
| Absorption voltage(Vdc) | AGM:13.5V,GEL:13.5V,LFP:13.5V,WET:13.7V |
| Floating voltage (Vdc) | AGM:14.4V,GEL:14.1V,LFP:14.4V,WET:14.7V |
| Charging current (A) | 10 | 25 | 40 | 25 | 40 |
| Min battery voltage (Vdc) | 1 | 2 |
| Efficiency | 88% |
| Input connector | Cable of 1.5 meter with CEE 7/7 plug | IEC socket |
| Output connector | Fixed cable,2.5mm², 1 meter | M4 Screw (16mm²) |
| Output | 1 | 1+1 |
| Ripple noise | ≤200mVp-p |
| Regulation Accuracy | ≤2% |
| Cooling | Self cooling | Fan cooling |
| Working Temperature | -20℃ -- +60℃ |
| Protection |
| Short circuit | Shutdown output, automatically restart when short circuit is removed |
| Reverse polarity | No charging |
| Charger over temp | Shut down the charger |
| Battery over temp | Shut down the charger |
| Standards |
| LVD | EN60335-1,EN60335-2-29 |
| EMC | EN55014-1,EN55014-2,EN61000-3-2,EN61000-3-3 |
| Structure |
| Out case | Aluminum+plastic |
| Dimension | 175*114*53mm | 249*165*74mm | 249*165*74mm |
| Weight | 1.0KG | 1.6KG | 1.6KG |
| IP class | IP20 | IP23 |
| Insulation Resistance | ≥50MΩ |
| Dielectric strength | I/P-O/P:3.0KV,I/P-PG:1.5KV,O/P-PG:0.5KV |
Installation
BS Charger can be installed on a horizontal surface or vertically on a wall. Please see following instruction;
Product Tags:
|
|
Marine And Boat Active Pfc Power Inverter Charger Images
|
